Ιδρυματικό Αποθετήριο [SANDBOX]
Πολυτεχνείο Κρήτης
EN  |  EL

Αναζήτηση

Πλοήγηση

Ο Χώρος μου

CAD-based simulation model for the calculation of chip geometry and cutting force components in gear shaping

Marinakis Angelos, Dandouti Emmanouela, Antoniadis Aristomenis

Απλή Εγγραφή


URIhttp://purl.tuc.gr/dl/dias/FCAAB180-BD09-4ACD-ACEE-6F12B1D334CE-
Αναγνωριστικόhttps://doi.org/10.1115/1.4053809-
Αναγνωριστικόhttps://doi.org/10.1115/1.4053809-
Γλώσσαen-
Μέγεθος10 pagesen
ΤίτλοςCAD-based simulation model for the calculation of chip geometry and cutting force components in gear shapingen
ΔημιουργόςMarinakis Angelosen
ΔημιουργόςΜαρινακης Αγγελοςel
ΔημιουργόςDandouti Emmanouelaen
ΔημιουργόςΔανδουτη Εμμανουελαel
ΔημιουργόςAntoniadis Aristomenisen
ΔημιουργόςΑντωνιαδης Αριστομενηςel
ΕκδότηςAmerican Society of Mechanical Engineersen
ΠερίληψηInvolute gears are a vital component used in industry due to their ability to provide flexible and accurate rotary motion. Gear shaping is one of the most prominent gear cutting processes as it can be used to effectively manufacture spur and helical external as well as internal gears. Thus, the accurate prediction of the cutting forces developed during the cutting process is of great importance because it can greatly affect the wear and the cutting tool’s life. In this work, a simulation model was developed based on a commercial CAD software, able to simulate the kinematics involved in the process and provide accurate results regarding the undeformed chip geometry as well as the cutting forces. In order to verify the accuracy of the model, the produced gear flanks are compared with the theoretical ones and the calculated cutting forces are compared with the respective measured forces obtained from the literature.en
ΤύποςPeer-Reviewed Journal Publicationen
ΤύποςΔημοσίευση σε Περιοδικό με Κριτέςel
Άδεια Χρήσηςhttp://creativecommons.org/licenses/by/4.0/en
Ημερομηνία2024-04-18-
Ημερομηνία Δημοσίευσης2022-
Θεματική ΚατηγορίαCAD/CAM/CAEen
Θεματική ΚατηγορίαMachining processesen
Θεματική ΚατηγορίαModeling and simulationen
Βιβλιογραφική ΑναφοράA. Marinakis, E. Dandouti, and A. Antoniadis, “CAD-based simulation model for the calculation of chip geometry and cutting force components in gear shaping,” J. Manuf. Sci. Eng., vol. 144, no. 8, Aug. 2022, doi: 10.1115/1.4053809.en

Υπηρεσίες

Στατιστικά