Ultrasound-assisted removal of Acid Red 17 using nanosized Fe3O4-loaded coffee waste hydrocharUltrasound-assisted removal of Acid Red 17 using nanosized Fe3O4-loaded coffee waste hydrochar Peer-Reviewed Journal Publication Δημοσίευση σε Περιοδικό με Κριτές 2018-05-292017enThe Fe3O4-loaded coffee waste hydrochar (Fe3O4-CHC) was synthesized using a simple precipitation method. The as-prepared adsorbent was characterized using scanning electron microscopy (SEM), transmission electron microscopy (TEM), energy-dispersive X-ray spectroscopy (EDX), X-ray diffraction (XRD), Brunauer-Emmett-Teller (BET) and Fourier transform infrared spectroscopy (FT-IR). The EDX analysis indicated the presence of Fe in the structure of Fe3O4-CHC. The specific surface area of hydrochar increased from 17.2 to 34.7 m2/g after loading of Fe3O4 nanoparticles onto it. The prepared Fe3O4-CHC was used for removal of Acid Red 17 (AR17) through ultrasound-assisted process. The decolorization efficiency decreased from 100 to 74% with the increase in initial dye concentration and from 100 to 91 and 85% in the presence of NaCl and Na2SO4, respectively. The synthesized Fe3O4-CHC exhibited good stability in the repeated adsorption-desorption cycles. The high correlation coefficient (R2 = 0.997) obtained from Langmuir model indicated that physical and monolayer adsorption of dye molecules occurred on the Fe3O4-CHC surface. Furthermore, the by-products generated through the degradation of AR17 was identified by gas chromatography–mass spectrometry analysis. http://creativecommons.org/licenses/by/4.0/Ultrasonics Sonochemistry35part 172-80 Kayan Berkant Kalderis Dimitrios Karimi Atefeh Akay Sema Konsolakis Michail Κονσολακης Μιχαηλ Elsevier Dye removal Fe3O4 nanoparticles Hydrochar Magnetite Sonolysis Ultrasound