Fabrication, characterization, and application of light weight thermal insulation material from combined buffing dust and plaster of paris for construction industryFabrication, characterization, and application of light weight thermal insulation material from combined buffing dust and plaster of paris for construction industry Peer-Reviewed Journal Publication Δημοσίευση σε Περιοδικό με Κριτές 2025-09-022023enBuffing dust, generated from tannery industries, is a source of air pollution in Pakistan. Valorization of the waste into another useful material is important to deal with the environmental pollution, while reducing waste disposal costs in landfills. To demonstrate its technological strength, this work fabricates a thermal insulation material made of plaster of Paris and the buffing dust (from tanning waste) in the form of a composite with superior mechanical properties and low thermal conductivity. Buffing dust with concentrations ranging from 5 to 20% (w/w) were loaded in the composite. The samples synthesized were made slurry of plaster of Paris, buffing dust, and water at ambient temperature. The physico-mechanical properties of composite were analyzed. It was found that the composite had better thermal insulation properties than the panels of the plaster of Paris. Its thermal conductivity was reduced to 15% after adding buffing dust (20% w/w). All the materials had physico-chemical properties like tensile strength (0.02 MPa and 0.06 MPa), density (700-400 kg/m3), water absorption (5.2–8.6%) and thermal conductivity (0.17000–0.09218 W/m-K). Thermogravimetric analysis showed that the material was thermally stable at temperatures ranging from 145 to 177 °C, while FT-IR results revealed that the composite contained O–H, N–H, and Cdouble bondO functional groups. SEM analysis displayed that the composite's homogeneity was reduced with low voids due to buffing dust addition, while EDX analysis showed that the composite contained 23.62% of S, 26.76% of Ca, 49.2% of O and 0.42% of C. This implies that buffing dust could be recycled to manufacture heat insulation materials for construction sector to reduce air pollution, while minimizing energy consumption. By integrating the buffing dust from tanning waste and the plaster of Paris as a composite for construction sector, this work promotes the recycling of unused waste, while saving public funds. Instead of paying landfill fees and polluting soil, the waste may be recycled at lower cost, while reducing environmental damage.http://creativecommons.org/licenses/by/4.0/Journal of Environmental Management347 Ulfat Wajad Mohyuddin Ayesha Amjad Muhammad Waleed Othman Mohd Hafiz Dzarfan Gikas Petros Γκικας Πετρος Kurniawan Tonni Agustiono Elsevier Air pollution Circular economy Energy consumption Heat insulation Waste valorization