Ιδρυματικό Αποθετήριο [SANDBOX]
Πολυτεχνείο Κρήτης
EN  |  EL

Αναζήτηση

Πλοήγηση

Ο Χώρος μου

Tracing sustainable production from a degrowth and localisation perspective: a case of 3D printers

Priavolou, Christina, 1990-, Troullaki Aikaterini, Tsiouris Nikiforos, Giotitsas, Christos, 1987-, Kostakis, Vasileios, 1985-

Απλή Εγγραφή


URIhttp://purl.tuc.gr/dl/dias/85A102FD-D55D-4D78-AE8F-972018D784F2-
Αναγνωριστικόhttps://doi.org/10.1016/j.jclepro.2022.134291-
Αναγνωριστικόhttps://www.sciencedirect.com/science/article/pii/S095965262203863X-
Γλώσσαen-
Μέγεθος41 pagesen
ΤίτλοςTracing sustainable production from a degrowth and localisation perspective: a case of 3D printersen
ΔημιουργόςPriavolou, Christina, 1990-en
ΔημιουργόςTroullaki Aikaterinien
ΔημιουργόςΤρουλλακη Αικατερινηel
ΔημιουργόςTsiouris Nikiforosen
ΔημιουργόςGiotitsas, Christos, 1987-en
ΔημιουργόςKostakis, Vasileios, 1985-en
ΕκδότηςElsevieren
ΠεριγραφήThis research was funded by the European Research Council (ERC) under the European Union’s Horizon 2020 research and innovation programme (grant number 802512). This work was also supported by the Hellenic Foundation for Research and Innovation (HFRI) under the HFRI PhD Fellowship grant (Fellowship Number: 632) and the European Commission through the H2020 project Finest Twins (grant No. 856602).en
ΠερίληψηAn emerging commons-oriented mode of production that combines globally accessible knowledge with distributed manufacturing has recently been presented as a better fit for sustainable degrowth and localisation, compared to incumbent practices. To tentatively test this potential we select the case of 3D printers. The production of 3D printers varies within a spectrum from proprietary and industrially produced to open-source and locally manufactured. We compare different 3D printers within this spectrum, adopting a values-based life cycle analysis tool that allows for a critical evaluation of the sustainability of 3D printers from a degrowth perspective. An emphasis on the prospects for sustainable localisation is given at each life cycle stage. We find significant advantages of open-source 3D printers in terms of education, experimentation and maintenance, and enhanced conviviality in case parts of their manufacturing is localised. Still, to a large extent their manufacturing process remains a highly centralised process, hindering additional benefits, and coherence with sustainable degrowth and localisation. We conclude with insights on how openness in terms of materials production and proper documentation of the manufacturing process, as well as a multi-level organisation for local production could lead to more sustainable practices.en
ΤύποςPeer-Reviewed Journal Publicationen
ΤύποςΔημοσίευση σε Περιοδικό με Κριτέςel
Άδεια Χρήσηςhttp://creativecommons.org/licenses/by-nc-sa/4.0/en
Ημερομηνία2024-04-18-
Ημερομηνία Δημοσίευσης2022-
Θεματική Κατηγορία3D printersen
Θεματική ΚατηγορίαSustainable productionen
Θεματική ΚατηγορίαDegrowthen
Θεματική ΚατηγορίαLocalisationen
Θεματική ΚατηγορίαLife cycle thinkingen
Θεματική ΚατηγορίαOpen sourceen
Βιβλιογραφική ΑναφοράC. Priavolou, K. Troullaki, N. Tsiouris, C. Giotitsas, and V. Kostakis, “Tracing sustainable production from a degrowth and localisation perspective: a case of 3D printers,” J. Cleaner Prod., 2022.en

Διαθέσιμα αρχεία

Υπηρεσίες

Στατιστικά