Institutional Repository [SANDBOX]
Technical University of Crete
EN  |  EL

Search

Browse

My Space

3D printed hierarchical honeycombs with carbon fiber and carbon nanotube reinforced acrylonitrile butadiene styrene

Mansour Misel-Teontor, Tsongas Konstantinos, Tzetzis Dimitrios

Simple record


URIhttp://purl.tuc.gr/dl/dias/E3BC821E-ED7D-483E-B687-682F4C088931-
Identifierhttps://doi.org/10.3390/jcs5020062-
Identifierhttps://www.mdpi.com/2504-477X/5/2/62-
Languageen-
Extent15 pagesen
Title3D printed hierarchical honeycombs with carbon fiber and carbon nanotube reinforced acrylonitrile butadiene styreneen
CreatorMansour Misel-Teontoren
CreatorΜανσουρ Μισελ-Τεοντορel
CreatorTsongas Konstantinosen
CreatorTzetzis Dimitriosen
PublisherMDPIen
Content SummaryThe mechanical properties of Fused Filament Fabrication (FFF) 3D printed specimens of acrylonitrile butadiene styrene (ABS), ABS reinforced with carbon fibers (ABS/CFs) and ABS reinforced with carbon nanotubes (ABS/CNTs) are investigated in this paper using various experimental tests. In particular, the mechanical performance of the fabricated specimens was determined by conducting compression and cyclic compression testing, as well as nanoindentation tests. In addition, the design and the manufacturing of hierarchical honeycomb structures are presented using the materials under study. The 3D printed honeycomb structures were examined by uniaxial compressive tests to review the mechanical behavior of such cellular structures. The compressive performance of the hierarchical honeycomb structures was also evaluated with finite element analysis (FEA) in order to extract the stress-strain response of these structures. The results revealed that the 2nd order hierarchy displayed increased stiffness and strength as compared with the 0th and the 1st hierarchies. Furthermore, the addition of carbon fibers in the ABS matrix improved the stiffness, the strength and the hardness of the FFF printed specimens as well as the compression performance of the honeycomb structures.en
Type of ItemPeer-Reviewed Journal Publicationen
Type of ItemΔημοσίευση σε Περιοδικό με Κριτέςel
Licensehttp://creativecommons.org/licenses/by/4.0/en
Date of Item2023-05-04-
Date of Publication2021-
SubjectAdditive manufacturingen
Subject3D printingen
SubjectMechanical propertiesen
SubjectHierarchical honeycomb structuresen
SubjectComposite filamentsen
SubjectCarbon nanotubesen
SubjectCarbon fibersen
SubjectFinite Element Analysis (FEA)en
Bibliographic CitationM. T. Mansour, K. Tsongas, and D. Tzetzis, “3D printed hierarchical honeycombs with carbon fiber and carbon nanotube reinforced acrylonitrile butadiene styrene,” J. Compos. Sci., vol. 5, no. 2, Feb. 2021, doi: 10.3390/jcs5020062.en

Available Files

Services

Statistics