Ιδρυματικό Αποθετήριο [SANDBOX]
Πολυτεχνείο Κρήτης
EN  |  EL

Αναζήτηση

Πλοήγηση

Ο Χώρος μου

Cyber-Physical Systems technologies as a key factor in the process of Industry 4.0 and Smart Manufacturing development

Zubrzycki Jaroslaw, Świć Antoni, Sobaszek, Łukasz, Kovac Juraj, Králiková, Ružena, 1956-, Jencik Robert, Šmídová Natália, Arapi Polyxeni, Dulencin Peter, Homza Jozef

Απλή Εγγραφή


URIhttp://purl.tuc.gr/dl/dias/242F3A46-2B9E-4774-8172-2CA4664552F9-
Αναγνωριστικόhttps://doi.org/10.23743/acs-2021-31-
Αναγνωριστικόhttp://www.acs.pollub.pl/index.php?option=com_content&view=article&id=518:cyber-physical-systems-technologies-as-a-key-factor-in-the-process-of-industry-40-and-smart-manufacturing-development-&catid=91:vol-17-no-4-2021&Itemid=165-
Γλώσσαen-
Μέγεθος16 pagesen
ΤίτλοςCyber-Physical Systems technologies as a key factor in the process of Industry 4.0 and Smart Manufacturing developmenten
ΔημιουργόςZubrzycki Jaroslawen
ΔημιουργόςŚwić Antonien
ΔημιουργόςSobaszek, Łukaszen
ΔημιουργόςKovac Jurajen
ΔημιουργόςKráliková, Ružena, 1956-en
ΔημιουργόςJencik Roberten
ΔημιουργόςŠmídová Natáliaen
ΔημιουργόςArapi Polyxenien
ΔημιουργόςΑραπη Πολυξενηel
ΔημιουργόςDulencin Peteren
ΔημιουργόςHomza Jozefen
ΕκδότηςPolish Association for Knowledge Promotionen
ΠερίληψηThe continuous development of production processes is currently observed in the fourth industrial revolution, where the key place is the digital transformation of production is known as Industry 4.0. The main technologies in the context of Industry 4.0 consist Cyber-Physical Systems (CPS) and Internet of Things (IoT), which create the capabilities needed for smart factories. Implementation of CPS solutions result in new possibilities creation – mainly in areas such as remote diagnosis, remote services, remote control, condition monitoring, etc. In this paper, authors indicated the importance of Cyber-Physical Systems in the process of the Industry 4.0 and the Smart Manufacturing development. Firstly, the basic information about Cyber-Physical Production Systems were outlined. Then, the alternative definitions and different authors view of the problem were discussed. Secondly, the conceptual model of Cybernetic Physical Production System was presented. Moreover, the case study of proposed solution implementation in the real manufacturing process was presented. The key stage of the verification concerned the obtained data analysis and results discussion.en
ΤύποςPeer-Reviewed Journal Publicationen
ΤύποςΔημοσίευση σε Περιοδικό με Κριτέςel
Άδεια Χρήσηςhttp://creativecommons.org/licenses/by/4.0/en
Ημερομηνία2023-04-28-
Ημερομηνία Δημοσίευσης2021-
Θεματική ΚατηγορίαIndustry 4.0en
Θεματική ΚατηγορίαCPSen
Θεματική ΚατηγορίαIoTen
Θεματική ΚατηγορίαMachine monitoringen
Βιβλιογραφική ΑναφοράJ. Zubrzycki, A. Świć, Ł. Sobaszek, J. Kovac, R. Kralikova, R. Jencik, N. Smidova, P. Arapi, P. Dulencin, and J. Homza, "Cyber-Physical Systems technologies as a key factor in the process of Industry 4.0 and Smart Manufacturing development," Appl. Comput. Sci., vol. 17, no. 4, pp. 84-99, 2021, doi: 10.23743/acs-2021-31.en

Διαθέσιμα αρχεία

Υπηρεσίες

Στατιστικά