Ιδρυματικό Αποθετήριο [SANDBOX]
Πολυτεχνείο Κρήτης
EN  |  EL

Αναζήτηση

Πλοήγηση

Ο Χώρος μου

FEM modeling and simulation of kerf formation in the nanosecond pulsed laser engraving process

Nikolidakis Evangelos, Antoniadis Aristomenis

Πλήρης Εγγραφή


URI: http://purl.tuc.gr/dl/dias/610142D8-CE7B-409E-B3FD-B3B7BB51519F
Έτος 2021
Τύπος Δημοσίευση σε Περιοδικό με Κριτές
Άδεια Χρήσης
Λεπτομέρειες
Βιβλιογραφική Αναφορά E. Nikolidakis, and A. Antoniadis, “FEM modeling and simulation of kerf formation in the nanosecond pulsed laser engraving process,” CIRP J. Manuf. Sci. Technol., vol. 35, pp. 236-249, Nov. 2021, doi: 10.1016/j.cirpj.2021.06.014. https://doi.org/10.1016/j.cirpj.2021.06.014
Εμφανίζεται στις Συλλογές

Περίληψη

In the present study, a finite element method (FEM) simulation model is developed for nanosecond pulsed laser engraving process. The model’s novelty lies in the fact that it predicts the actual dimensions of the engraved geometry emphasizing the dimensional deviation due to the defects from kerf formation such as the sloped side walls instead of the intended vertical ones. Simulations were performed and the values of kerf taper angle, top kerf width and bottom kerf width were compared with the corresponding ones from experimental tests made using a LASERTEC 40 laser engraving machine and also were used for process optimization.

Υπηρεσίες

Στατιστικά