Ιδρυματικό Αποθετήριο [SANDBOX]
Πολυτεχνείο Κρήτης
EN  |  EL

Αναζήτηση

Πλοήγηση

Ο Χώρος μου

Design and structural analysis of a front single-sided swingarm for an electric three-wheel motorcycle

Spanoudakis Polychronis, Christenas Evangelos, Tsourveloudis Nikolaos

Πλήρης Εγγραφή


URI: http://purl.tuc.gr/dl/dias/1E5419FD-70AA-4684-82C7-7BA16BF8E895
Έτος 2020
Τύπος Δημοσίευση σε Περιοδικό με Κριτές
Άδεια Χρήσης
Λεπτομέρειες
Βιβλιογραφική Αναφορά P. Spanoudakis, E. Christenas, and N. C. Tsourveloudis, “Design and structural analysis of a front single-sided swingarm for an electric three-wheel motorcycle,” Appl. Sci., vol. 10, no. 17, Sep. 2020. doi: 10.3390/app10176063 https://doi.org/10.3390/app10176063
Εμφανίζεται στις Συλλογές

Περίληψη

This study focuses on the structural analysis of the front single-sided swingarm of a new three-wheel electric motorcycle, recently designed to meet the challenges of the vehicle electrification era. The primary target is to develop a swingarm capable of withstanding the forces applied during motorcycle’s operation and, at the same time, to be as lightweight as possible. Different scenarios of force loadings are considered and emphasis is given to braking forces in emergency braking conditions where higher loads are applied to the front wheels of the vehicle. A dedicated Computer Aided Engineering (CAE) software is used for the structural evaluation of different swingarm designs, through a series of finite element analysis simulations. A topology optimization procedure is also implemented to assist the redesign effort and reduce the weight of the final design. Simulation results in the worst-case loading conditions, indicate strongly that the proposed structure is effective and promising for actual prototyping. A direct comparison of results for the initial and final swingarm design revealed that a 23.2% weight reduction was achieved.

Διαθέσιμα αρχεία

Υπηρεσίες

Στατιστικά