Ιδρυματικό Αποθετήριο [SANDBOX]
Πολυτεχνείο Κρήτης
EN  |  EL

Αναζήτηση

Πλοήγηση

Ο Χώρος μου

A life cycle assessment of PCM and VIP in warm Mediterranean climates and their introduction as a strategy to promote energy savings and mitigate carbon emissions

Papadaki Dimitra, Foteinis Spyridon, Binas Vassilios D., Assimakopoulou, Margarita-Niki, 1977-...., Auteur d'une thèse en Génie Civil, Tsoutsos Theocharis, Kiriakidis, G

Απλή Εγγραφή


URIhttp://purl.tuc.gr/dl/dias/1B92FA6C-C4B6-4A77-9985-8A14FB95395D-
Αναγνωριστικόhttps://doi.org/10.3934/matersci.2019.6.944-
Αναγνωριστικόhttps://www.aimspress.com/article/10.3934/matersci.2019.6.944-
Γλώσσαen-
Μέγεθος16 pagesen
ΤίτλοςA life cycle assessment of PCM and VIP in warm Mediterranean climates and their introduction as a strategy to promote energy savings and mitigate carbon emissionsen
ΔημιουργόςPapadaki Dimitraen
ΔημιουργόςFoteinis Spyridonen
ΔημιουργόςΦωτεινης Σπυριδωνel
ΔημιουργόςBinas Vassilios D.en
ΔημιουργόςAssimakopoulou, Margarita-Niki, 1977-...., Auteur d'une thèse en Génie Civilen
ΔημιουργόςTsoutsos Theocharisen
ΔημιουργόςΤσουτσος Θεοχαρηςel
ΔημιουργόςKiriakidis, Gen
ΕκδότηςAIMS Pressen
ΠερίληψηThe building stock in southern Europe grossly lacks sufficient thermal envelope insulation, leading to high energy inputs and corresponding CO2 emissions. Phase change materials (PCMs) and vacuum insulations panels (VIPs) could be an innovative way to curtail the high heating and cooling energy inputs to maintain comfort; however, their efficiency and environmental performance in the southern Mediterranean climate is largely unknown. To this end, two demo houses, 27 m3 each, were constructed in the island of Crete, southern Greece. The first was constructed using conventional building materials, while in the second PCMs and VIPs were used, as a research test-bed. Actual life cycle inventory (LCI) data were collected and the life cycle assessment (LCA) methodology was employed to estimate the environmental impacts attributed both to their construction and operational phase. Compared to the conventional demo house the one covered with PCMs and VIPs appear to have a 34% higher total environmental footprint, which is attributed to the production process of PCMs and VIPs. Nonetheless, the energy savings observed during the operational phase, attributed to their higher thermal insulation, can compensate the higher environmental footprint of the construction phase within a year, depending on PCM's enthalpy. Specifically, it was identified that PCMs and VIPs largely reduced daily indoor temperature fluctuations, improving indoor thermal comfort and leading to energy savings. As such, even though their installation is associated with an initial higher environmental footprint, large energy savings, compared to conventional demo house, are achieved during its operational phase. This suggests that the introduction of PCMs and VIPs could be an efficient and environmentally friendly route to enhance energy savings and reduce the environmental footprint of building stock.en
ΤύποςPeer-Reviewed Journal Publicationen
ΤύποςΔημοσίευση σε Περιοδικό με Κριτέςel
Άδεια Χρήσηςhttp://creativecommons.org/licenses/by/4.0/en
Ημερομηνία2020-10-29-
Ημερομηνία Δημοσίευσης2019-
Θεματική ΚατηγορίαBuilding envelope insulationen
Θεματική ΚατηγορίαEnvironmental footprinten
Θεματική ΚατηγορίαEnvironmental sustainabilityen
Θεματική ΚατηγορίαLife cycle assessment (LCA)en
Θεματική ΚατηγορίαPhase change materials (PCMs)en
Θεματική ΚατηγορίαVacuum insulation panels (VIPs)en
Βιβλιογραφική ΑναφοράD. Papadaki, S. Foteinis, V. Binas, M.N. Assimakopoulos, T. Tsoutsos, G. Kiriakidis, "A life cycle assessment of PCM and VIP in warm Mediterranean climates and their introduction as a strategy to promote energy savings and mitigate carbon emissions," AIMS Mater. Sci., vol. 6, no. 6, pp. 944-959, Oct. 2019. doi: 10.3934/matersci.2019.6.944en

Διαθέσιμα αρχεία

Υπηρεσίες

Στατιστικά