Ιδρυματικό Αποθετήριο [SANDBOX]
Πολυτεχνείο Κρήτης
EN  |  EL

Αναζήτηση

Πλοήγηση

Ο Χώρος μου

Surface topomorphy and roughness prediction in micro-ball-end milling using a CAD-based simulation

Vakondios Dimitrios, Kyratsis Panagiotis, Lyronis Antonios, Antoniadis Aristomenis

Απλή Εγγραφή


URIhttp://purl.tuc.gr/dl/dias/DE53DA93-432D-4114-89D7-6469B082F728-
Αναγνωριστικόhttps://www.inderscienceonline.com/doi/abs/10.1504/IJMMM.2017.086162-
Αναγνωριστικόhttps://doi.org/10.1504/IJMMM.2017.086162-
Γλώσσαen-
Μέγεθος12 pagesen
ΤίτλοςSurface topomorphy and roughness prediction in micro-ball-end milling using a CAD-based simulationen
ΔημιουργόςVakondios Dimitriosen
ΔημιουργόςΒακονδιος Δημητριοςel
ΔημιουργόςKyratsis Panagiotisen
ΔημιουργόςLyronis Antoniosen
ΔημιουργόςΛυρωνης Αντωνιοςel
ΔημιουργόςAntoniadis Aristomenisen
ΔημιουργόςΑντωνιαδης Αριστομενηςel
ΕκδότηςInderscienceen
ΠερίληψηBall-end milling is a widely used finishing process in metal cutting. The small size and the complex of metal machining components are the main reasons for implementing milling in microscale. The surface profile and the dimensional accuracy are key factors on the quality of surface of a product. The selection of optimal cutting conditions can be accomplished by utilising simulation models which can involve the kinematics and the strategies of milling processes. Therefore, the analytical prediction of the produced surface quality (topomorphy and roughness) can be reached. The present study indicates a 3D simulation model of ball-end micro-milling process developed in commercial CAD software and its optical and computing results. Micro-milling experiments of Al7075-T6 were carried out in different conditions by the use of a high speed spindle. A computer application was developed to calculate the roughness out of the controlled points of a plane that intersects with the 3D workpiece. The calculated roughness was compared with the measured surface roughness and the surface topomorphy was captured through a stereo microscope.en
ΤύποςPeer-Reviewed Journal Publicationen
ΤύποςΔημοσίευση σε Περιοδικό με Κριτέςel
Άδεια Χρήσηςhttp://creativecommons.org/licenses/by/4.0/en
Ημερομηνία2018-06-21-
Ημερομηνία Δημοσίευσης2017-
Θεματική ΚατηγορίαCAD-based simulationen
Θεματική ΚατηγορίαMicro-ball-end millingen
Θεματική ΚατηγορίαSurface roughnessen
Θεματική ΚατηγορίαSurface topomorphyen
Βιβλιογραφική ΑναφοράD. Vakondios, P. Kyratsis, A. Lyronis and A. Antoniadis, "Surface topomorphy and roughness prediction in micro-ball-end milling using a CAD-based simulation," Int. J. Mach. Mach. Mater., vol. 19, no. 4, pp. 313-324, 2017. doi: 10.1504/IJMMM.2017.086162en

Υπηρεσίες

Στατιστικά