![Institutional Repository [SANDBOX]](images/dias.logo.png "Institutional Repository [SANDBOX]"){kind=logo}
Institutional Repository [SANDBOX]
Technical University of Crete
Technical University of Crete
EN
|
EL
| URI | http://purl.tuc.gr/dl/dias/182584BB-3E26-4F0F-8094-C1488EDA2558 | - |
| Identifier | https://doi.org/10.26233/heallink.tuc.74191 | - |
| Language | en | - |
| Extent | 60 pages | en |
| Title | Design of the full casing program in a deviated well | en |
| Creator | Aslanidis Panagiotis | en |
| Creator | Ασλανιδης Παναγιωτης | el |
| Contributor [Thesis Supervisor] | Gaganis Vasileios | en |
| Contributor [Thesis Supervisor] | Γαγανης Βασιλειος | el |
| Contributor [Committee Member] | Varotsis Nikolaos | en |
| Contributor [Committee Member] | Βαροτσης Νικολαος | el |
| Contributor [Committee Member] | Kalogerakis Nikos | en |
| Contributor [Committee Member] | Καλογερακης Νικος | el |
| Publisher | Πολυτεχνείο Κρήτης | el |
| Publisher | Technical University of Crete | en |
| Academic Unit | Technical University of Crete::School of Mineral Resources Engineering | en |
| Academic Unit | Πολυτεχνείο Κρήτης::Σχολή Μηχανικών Ορυκτών Πόρων | el |
| Content Summary | Casing design constitutes of one of the major challenges in the oil industry. This is due to the fact that casing has to protect the well from the formation environment, which is going through and also from the variation of different conditions that occur in the subsurface. To initiate the design procedure, the construction of the pore and fracture pressure profile is required based on which, the number of the casing strings will be selected. Subsequently, the outside diameters (OD) of each casing string must be defined, as wells as the equivalent mud density (EMD), which will be used in each section. In addition, survey of the well is needed in order to convert the true vertical depth (TVD) to measured depth (MD). Finally, the calculations of the major forces that act on the well (burst, collapse and tension) are required, so that the final casing thickness and grade can be selected. The objective of this project is to provide a casing design on deviated, deep well (type slanted at target depth of 13000 ft) by taking into account the worst case scenario of all the above forces. | en |
| Type of Item | Μεταπτυχιακή Διατριβή | el |
| Type of Item | Master Thesis | en |
| License | http://creativecommons.org/licenses/by/4.0/ | en |
| Date of Item | 2018-04-24 | - |
| Date of Publication | 2018 | - |
| Subject | Drilling engineering | en |
| Bibliographic Citation | Panagiotis Aslanidis, "Design of the full casing program in a deviated well", Master Thesis, School of Mineral Resources Engineering, Technical University of Crete, Chania, Greece, 2018 | en |
Copyright © DIAS 2013
