Institutional Repository [SANDBOX]
Technical University of Crete
EN  |  EL

Search

Browse

My Space

Highway traffic state estimation with mixed connected and conventional vehicles using speed measurements

Bekiaris-Liberis Nikolaos, Roncoli Claudio, Papageorgiou Markos

Simple record


URIhttp://purl.tuc.gr/dl/dias/7F4A8554-D7BE-45F4-A6E9-571990C74C12-
Identifierhttps://doi.org/10.1109/ITSC.2015.451-
Identifierhttps://ieeexplore.ieee.org/document/7313543-
Languageen-
Extent6 pagesen
TitleHighway traffic state estimation with mixed connected and conventional vehicles using speed measurementsen
CreatorBekiaris-Liberis Nikolaosen
CreatorΜπεκιαρης-Λυμπερης Νικολαοςel
CreatorRoncoli Claudioen
CreatorRoncoli Claudioel
CreatorPapageorgiou Markosen
CreatorΠαπαγεωργιου Μαρκοςel
PublisherInstitute of Electrical and Electronics Engineersen
DescriptionThe research leading to these results has received funding from the European Research Council under the European Union's Seventh Framework Programme (FP/2007-2013) / ERC Grant Agreement n. 321132, project TRAMAN21.en
Content SummaryWe present a macroscopic model-based approach for estimation of the total density and flow of vehicles, for the case of “mixed” traffic, i.e., traffic comprising both ordinary and connected vehicles, utilizing only average speed measurements reported by connected vehicles and a minimum number (sufficient to guarantee observability) of spot sensor-based total flow measurements. The approach is based on the realistic assumption that the average speed of conventional vehicles is roughly equal to the average speed of connected vehicles, and consequently, it can be obtained at the (local or central) traffic monitoring and control unit from connected vehicles’ reports. Thus, complete traffic state estimation (for arbitrarily selected segments in the network) may be achieved by estimating the total density of vehicles. Recasting the dynamics of the total density of vehicles, which are described by the well-known conservation law equation, as a linear time-varying system, we employ a Kalman filter for the estimation of the total density. We demonstrate the fact that the developed approach allows a variety of different measurement configurations, by also considering the case in which additional mainstream total flow measurements are employed to replace a corresponding number of total flow measurements at on-ramps or off-ramps. We validate the performance of the developed estimation scheme through simulations using a well-known second-order traffic flow model as ground truth for the traffic state.en
Type of ItemΠλήρης Δημοσίευση σε Συνέδριοel
Type of ItemConference Full Paperen
Licensehttp://creativecommons.org/licenses/by-nc-nd/4.0/en
Date of Item2016-04-21-
Date of Publication2015-
SubjectHighway traffic state estimationen
SubjectConnected vehiclesen
SubjectConventional vehiclesen
SubjectSpeed measurementen
Bibliographic CitationN. Bekiaris-Liberis, C. Roncoli and M. Papageorgiou, "Highway traffic state estimation with mixed connected and conventional vehicles using speed measurements," in 18th International IEEE Conference on Intelligent Transportation Systems, 2015, pp. 2806-2811. doi: 10.1109/ITSC.2015.451en

Available Files

Services

Statistics