![Institutional Repository [SANDBOX]](images/dias.logo.png "Institutional Repository [SANDBOX]"){kind=logo}
Institutional Repository [SANDBOX]
Technical University of Crete
Technical University of Crete
EN
|
EL
| URI | http://purl.tuc.gr/dl/dias/8BEC5FC3-32F4-42BA-B3B0-3E31D10C4378 | - |
| Identifier | http://www.tandfonline.com/doi/abs/10.1080/03091900600700749 | - |
| Identifier | https://doi.org/10.1080/03091900600700749 | - |
| Language | en | - |
| Extent | 7 pages | en |
| Title | Reverse engineering techniques for cranioplasty: a case study | en |
| Creator | Maravelakis, Emmanuel | en |
| Creator | David K. | en |
| Creator | Antoniadis Aristomenis | en |
| Creator | Αντωνιαδης Αριστομενης | el |
| Creator | Manios A. | en |
| Creator | Bilalis Nikolaos | en |
| Creator | Μπιλαλης Νικολαος | el |
| Creator | Papaharilaou, Yannis | en |
| Publisher | Taylor & Francis | en |
| Content Summary | This paper presents rapid prototyping and reverse engineering techniques applied to create an implant for the surgical reconstruction of a large cranial defect. A series of computed tomography (CT) images was obtained and purpose built software was used to extract the cranial geometry in a point cloud. The point cloud produced was used for: (a) the creation of a stereolithographic (STL) physical model for direct assessment of the cranial defect; and (b) the creation of a 3D mould model for the fabrication of the patient-specific implant. | en |
| Type of Item | Peer-Reviewed Journal Publication | en |
| Type of Item | Δημοσίευση σε Περιοδικό με Κριτές | el |
| License | http://creativecommons.org/licenses/by/4.0/ | en |
| Date of Item | 2015-10-23 | - |
| Date of Publication | 2008 | - |
| Subject | Cranioplasty | en |
| Subject | Implant modelling | en |
| Subject | Desktop automated manufacturing | en |
| Subject | Freeform fabrication | en |
| Subject | Freeform manufacturing | en |
| Subject | Prototyping, Rapid | en |
| Subject | RP (Rapid prototyping) | en |
| Subject | rapid prototyping | en |
| Subject | desktop automated manufacturing | en |
| Subject | freeform fabrication | en |
| Subject | freeform manufacturing | en |
| Subject | prototyping rapid | en |
| Subject | rp rapid prototyping | en |
| Subject | Reverse engineering | en |
| Bibliographic Citation | E. Maravelakis, K. David, A. Antoniadis, A. Manios, N. Bilalis and Y. Papaharilaou, "Reverse engineering techniques for cranioplasty: a case study" J. Medical Eng. and Technology, vol. 32, no. 2, pp. 115-121, 2008. doi:10.1080/03091900600700749 | en |
Copyright © DIAS 2013
