Ιδρυματικό Αποθετήριο [SANDBOX]
Πολυτεχνείο Κρήτης
EN  |  EL

Αναζήτηση

Πλοήγηση

Ο Χώρος μου

Optimal selection of machining data in gear hobbing regarding the tool mechanical stresses occuring during the cutting process

Bouzakis, Konstantinos-Dionysios, Antoniadis Aristomenis

Πλήρης Εγγραφή


URI: http://purl.tuc.gr/dl/dias/E5551CA0-7371-457F-AFCC-66892E73C794
Έτος 1988
Τύπος Δημοσίευση σε Περιοδικό με Κριτές
Άδεια Χρήσης
Λεπτομέρειες
Βιβλιογραφική Αναφορά K.-D. Bouzakis and A. Antoniadis, "Optimal selection of machining data in gear hobbing regarding the tool mechanical stresses occuring during the cutting process", CIRP Annals, vol. 37, no. 1, pp. 109-112, 1988. doi:10.1016/S0007-8506(07)61597-2 https://doi.org/10.1016/S0007-8506(07)61597-2
Εμφανίζεται στις Συλλογές

Περίληψη

The use of carbide tools in gear hobbing offers a possibility to increase the cutting performance Cracks of the cutting edges which may appear almost at the beginning of the cutting process obstruct the successful application of carbide hobs. Such cutting edge fractures occur mainly owing to mechanical overloads of tile used carbide materials.For the determination of the mechanical stresses in the hob teeth during the cutting process and herewith for the optimal selection of tool and machining data, a computer supported calculation method is developed. The paper deals with this method. Calculations examples demonstrate the stress distribution in the hob teeth, which may cause cutting edges cracks in hobbing of helix gears.

Υπηρεσίες

Στατιστικά