Το work with title Application of solid-phase microextraction for the analysis of nitropolycyclic aromatic hydrocarbons in water by Mekiki Dora, Kalogerakis Nikos, Psyllaki Eleftheria is licensed under Creative Commons Attribution 4.0 International
Bibliographic Citation
D. Mekiki, N. Kalogerakis and E. Psillakis, "Application of solid-phase microextraction for the analysis of nitropolycyclic aromatic hydrocarbons in water," Chromatographia, vol. 63, no. 1-2, pp. 85-89, Jan. 2006. doi: 10.1365/s10337-005-0693-6
https://doi.org/10.1365/s10337-005-0693-6
The present work investigates the applicability of solid-phase microextraction coupled to gas-chromatography mass-spectrometry for the determination of trace amounts of nitropolycyclic aromatic hydrocarbons in water samples. The main parameters affecting solid-phase microextraction (sampling mode, fibre type, sampling time, agitation rate and ionic strength of the aqueous solution) were controlled and the optimal experimental conditions found were: 65-µm polydimethylsiloxane-divinylbenzene fibre immersed for 45 min to 5 mL spiked water samples, stirred at 1250 rpm. The developed solid-phase microextraction method was found to be linear in the concentration range 0.1 to 10 µg L−1, with the detection limits ranging between 0.004 and 0.060 µg L−1 (under the selective ion monitoring mode) and the repeatability varying between 1.7 and 5.9% (n=5). Analysis of spiked tap and well water samples revealed that matrix had little effect on extraction. Overall, it was found that solid-phase microextraction is suitable for the trace analysis of nitropolycyclic aromatic hydrocarbons in water samples.